Engineering, 27.08.2021 21:20 trillsmith

What discovery did the City of Miami make when testing vehicles with modified power systems? The city learned that the vehicles made hundreds of stops per day, decreasing their efficiency over time.

The city learned that the vehicles made hundreds of stops per day, increasing their efficiency over time.

The city found that fuel consumption was reduced by 75 percent, and fuel economy improved by 43 percent.

The city found that fuel consumption was reduced by 43 percent, and fuel economy improved by 75 percent.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, meganwintergirl

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 19:10, alex6toes

What are the major differences between injection molding and extrusion?

Answers: 2

continue

You know the right answer?

What discovery did the City of Miami make when testing vehicles with modified power systems? The c...