subject
Engineering, 27.08.2021 01:20 jocelynmarquillo1

The impeller on the radial flow pump has an average inlet radius of 5 cm and outlet radius of 15 cm and an average width of 3 cm. If the blade angles are 20o and 10o at inlet and outlet respectively, determine the flow through the pump, the ideal pump head when the impeller is rotating at 360 rpm. The flow onto the impeller is in the radial direction.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
image
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
image
Engineering, 04.07.2019 18:20, rbgrh9465
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
image
Engineering, 04.07.2019 18:20, cdyshaylia55
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
You know the right answer?
The impeller on the radial flow pump has an average inlet radius of 5 cm and outlet radius of 15 cm...

Questions in other subjects:

Konu
Mathematics, 07.09.2021 06:10
Konu
History, 07.09.2021 06:10