subject
Engineering, 23.08.2021 21:40 rachelbrooks764

2. A trapezoidal channel has a bottom width of 4 m and side slopes of 2.75:1 (H:V). If the flow rate is 50 m3/s at a depth of 3.2 m, report whether the flow is subcritical or supercritical. Also determine the alternate depth (for the same specific energy). Also determine the critical depth.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, namira16
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
image
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
image
Engineering, 04.07.2019 18:20, dlr1628
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
image
Engineering, 04.07.2019 19:10, jimena15
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
You know the right answer?
2. A trapezoidal channel has a bottom width of 4 m and side slopes of 2.75:1 (H:V). If the flow rate...

Questions in other subjects:

Konu
Mathematics, 10.04.2021 22:50
Konu
Mathematics, 10.04.2021 22:50