Challenge 1: Patterns Record all of the possible three place value patterns that use
only the circle and square shapes. A few are listed in the
diagram to the right
Try to make sure these patterns are in some type of order and
avoid putting down patterns randomly

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.