Engineering, 13.08.2021 17:10 rose5986

Microprocessor: Assume, a switch is connected to bit 0 (LSB) of the input port (address $9000). If that bit is one (1), the switch is ON. A light bulb is connected to bit 7 (MSB) of out port (address $8000). A one (1) makes the bulb ON. If the switch is ON, we are going to make the bulb ON otherwise keep it OFF. Write an input/output program to control the light bulb.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 19:10, alex6toes

What are the major differences between injection molding and extrusion?

Answers: 2

continue

Engineering, 04.07.2019 19:10, Calliedevore

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false

Answers: 3

continue

Engineering, 04.07.2019 19:10, lexie223

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

continue

You know the right answer?

Microprocessor: Assume, a switch is connected to bit 0 (LSB) of the input port (address $9000). If t...