Engineering, 13.08.2021 01:00 littleprinces

Determine the required reactor volume, in million gallons (MG), for a completely mixed, aerobic, activated sludge system which will treat 1 MGD of domestic wastewater. The waste water has an initial ultimate BOD of 200 mg/L. The effluent requirement is 10 mg/L of ultimate BOD. The first order degradation rate constant is K = 0.1 L/mg-day, i. e. the governing equation is q = KSe for calculating the specific substrate utilization rate (q) through kinetic parameters. Se is the effluent ultimate BOD (i. e. 10 mg/L). The mixed liquor volatile suspended solids (X) equals 3,000 mg/L. What is the reactor volume? a. 0.095 MG
b. 0.063 MG
c. 0.92 MG
d. 0.13 MG

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 19:10, alex6toes

What are the major differences between injection molding and extrusion?

Answers: 2

continue

Engineering, 04.07.2019 19:10, netflixacc0107

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

continue

You know the right answer?

Determine the required reactor volume, in million gallons (MG), for a completely mixed, aerobic, act...