subject
Engineering, 06.08.2021 16:00 rusa25

A cylinder, 6 mm in diameter, has a length of 24 mm. One end of the cylinder is open while all other surfaces have external insulation. The inside of the cylinder is diffuse and gray having an emissivity of 0.8 and a uniform temperature of 1000 K. (a) Draw a sketch and state your assumptions
(b) Determine the radiant power leaving the open end of the cylinder.
(c) Calculate the effective emissivity of the cylinde.
(d) The length of the cylinder is decreased to 6mm, what is the effective emissivity of the cylinder?
(e) If the length of the cylinder is decreased further, do you expect an increase or decrease in the effective emissivity?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 16:10, Arealbot
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
image
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
image
Engineering, 04.07.2019 18:20, myahlit84
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
image
Engineering, 04.07.2019 18:20, safiyabrowne7594
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
You know the right answer?
A cylinder, 6 mm in diameter, has a length of 24 mm. One end of the cylinder is open while all other...

Questions in other subjects: