Engineering, 26.07.2021 14:50 kuadirkennedy
Calculate the force required in direct extrusion of 1100-O aluminum from a diameter of 6 mm. to 2 mm. Assume that the redundant work is 30% of the ideal work of deformation, and the friction work is 25% of the total work of deformation. K = 180 MPa and n = 0.20.
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10, krystabrewer3
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
You know the right answer?
Calculate the force required in direct extrusion of 1100-O aluminum from a diameter of 6 mm. to 2 mm...
Questions in other subjects:
History, 21.04.2020 06:52
Mathematics, 21.04.2020 06:52
Mathematics, 21.04.2020 06:52
Mathematics, 21.04.2020 06:52
Mathematics, 21.04.2020 06:53
Mathematics, 21.04.2020 06:53
