Engineering, 22.07.2021 15:20 justin5647

If the engine won't rev above:. (1) 2,000 RPM there is an issue with the Electric throttle control actuator.
(2) 2,400 RPM there is an issue with one of the MAFs / or engine oil pressure
(3) 3,500 RPM there is an issue with the VVEL actuator motor / relay
The lowest cost next step is to get an ELM327 and a app (Torque or OBD Fusion) and look at your "mode $06" data. (assuming your scanner does not read mode $06)
Mode $06 is a series of tests that are run on your car as you drive it. It also has counters that can tell you if the car has misfired. I suspect you will find some failed items in the mode $06 data, and that is your first clue to finding out what the root issue is.
If the above is not for you, then take it to a shop and have them scan and print the mode $06 data.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

You know the right answer?

If the engine won't rev above:. (1) 2,000 RPM there is an issue with the Electric throttle control...