Engineering, 13.07.2021 17:10 KaseyT
SE DEBE CONTRUIR UNA PARED QUE TENDRA 4 METROS DE LARGO POR 3 METROS DE ALTO. SI SE UTILIZARAN LADRILLOS HUECOS Y TENIENDO EN CUENTA QUE ENTRE LADRILLO Y LADRILLO SE DEBE COLOCAR ALREDEDOR DE DOS CENTÍMETROS DE MEZCLA PARA UNIRLOS….. ¿ CUANTOS LADRILLOS SERAN NECESARIOS APROXIMADAMENTE PARA CONTRUIR LA PARED?.
Answers: 2
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10, selenamr
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed. gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
SE DEBE CONTRUIR UNA PARED QUE TENDRA 4 METROS DE LARGO POR 3 METROS DE ALTO. SI SE UTILIZARAN LADRI...
English, 22.10.2019 09:50
Mathematics, 22.10.2019 09:50
Social Studies, 22.10.2019 09:50
Mathematics, 22.10.2019 09:50
Mathematics, 22.10.2019 09:50
Mathematics, 22.10.2019 09:50