Engineering, 07.07.2021 14:00 jstephanie644

Across 2. a P type material is missing this
6. the base of this transistor is made of a P type
material
7. these have no moving parts and act as electrical
switches
10. these are used in radio circuits and PCM's
13. these are used in bridge rectifiers
14. controlling high current flow, small size and low
power consumption are advantages of this type of
transistor
15. one of the materials used as a base for
Semiconductors
Created using the Crossword Maker on The Teachers Corner. net
Down
1. one of the materials used as a base for
semiconductors
3. acts as a solid state relay
4. what a diode will do when forward blased
5. what an LED produces when forward biased
B. components using semiconductor material are
called this
9. direction a diode is installed
11. the leg that does not have power applied in a NPN
transistor
12. process of adding impurities to a silicon base

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 19:20, Katmcfee7681

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w

Answers: 2

continue

You know the right answer?

Across 2. a P type material is missing this
6. the base of this transistor is made of a P typ...