subject
Engineering, 06.07.2021 22:10 xojade

The compression ratio of an ideal air standard Otto cycle is 9.5. Before the isentropic compression process, the air is at 100 kPa and 35°C. The temperature at the end of isentropic
expansion is 800 K. Assume that air is an ideal gas with constant specific heats, calculate each of
the following, given that Cr=0.718 kJ/kgK, Cp=1.005 kl/kg K and gamma=1.4
1) The temperature after isentropic compression
a) 650 K b) 758 K c) 473K d) 512 K
2) The highest temperature in the cycle
a) 1969 K b) 2320 K c) 1250 K d) 941 K
3) The amount of heat added to the cycle in kJ/kg
a) 1360.5 b) 869.5 c) 1220.2 d) 678.4
4) The amount of heat rejected from the cycle in kJ/kg
a) 223.5 b) 495.7 c) 353.2 d) 687.8
5) The net work output from the cycle in kl/kg
a) 396.5 b) 516.2 c) 1135.2 d) 819.2
6) The cycle efficiency is
a) 59.4% b) 69.6% c) 36.2% d) 42.5%

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
image
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
The compression ratio of an ideal air standard Otto cycle is 9.5. Before the isentropic compressi...

Questions in other subjects:

Konu
Mathematics, 04.05.2021 18:40
Konu
Biology, 04.05.2021 18:40