Engineering, 06.07.2021 22:00 fluffypuppies24

he volume of a steady-state crystallizer is 85,000 L, and the solids fraction in the unit and the exiting stream is 0.35; that is, there are 0.35 kg of crystals per kg of slurry (the crystal-solution mixture). The density of the solution is 1.1 g/mL and that of the crystals is 2.3 g/mL. The production rate of crystals from the crystallizer is 19.5 kg crystals/min. Estimate the volumetric flow rate of slurry from the crystallizer and the drawdown time of the crystallizer (the time it would take to empty the crystallizer if the feed were discontinued)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Engineering, 04.07.2019 18:20, cdyshaylia55

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

continue

You know the right answer?

he volume of a steady-state crystallizer is 85,000 L, and the solids fraction in the unit and the ex...