The effective diameters of two pulleys of a belt drive are 300 mm and 900 mm respectively. The large pulley rotates at 120 r/min and is then accelerated uniformly to 660 r/min during 50 revolutions. Calculate: The final linear velocity of the belt.​

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.