Engineering, 24.06.2021 23:30 jacksonyodell8601

Air at T1 = 300 K, p1 = 303 kPa, and V1 = 0.5 m/s enters the Venturi shown in Fig. P5.43. The air leaves at T2 = 220 K and p2 = 101 kPa; A1 = 0.6 m2 and A2 = 1.0 m2. Calculate the horizontal force required to hold the Venturi stationary.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Engineering, 04.07.2019 19:10, LadyHolmes67

Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false

Answers: 3

continue

Engineering, 05.07.2019 23:20, neisha2507

Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket

Answers: 3

continue

You know the right answer?

Air at T1 = 300 K, p1 = 303 kPa, and V1 = 0.5 m/s enters the Venturi shown in Fig. P5.43. The air le...