Engineering, 21.06.2021 15:50 Ladyt916

There is a cantilever beam with a rectangular cross-section, loaded with uniformly distributed loading. As a result of this loading, considerable shear forces develop within the beam. The width of the beam is 120cm, while the height of the beam is 50cm. If you are required to design the beam against shear, would you use the shear formula? Explain the reason for your answer with 3 sentences, maximum.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Engineering, 04.07.2019 18:20, samueltaye

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

continue

You know the right answer?

There is a cantilever beam with a rectangular cross-section, loaded with uniformly distributed loadi...