Engineering, 19.06.2021 14:00 JojoSiwa901

) Xác định cách ghi quyền hạn người ký văn bản hành chính trong các trường hợp sau:
a) Quyết định của Hiệu trưởng Trường ĐH Nha Trang do Phó Hiệu trưởng ký.
b) Quyết định của Hội đồng quản trị Công ty CP Z do Chủ tịch ký.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:10, jrcspiderman2003

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

continue

Engineering, 05.07.2019 10:10, johns2380

What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.

Answers: 1

continue

Engineering, 06.07.2019 03:30, relic7391

The load on a bolt consists of an axial pull of 10 kn together with a transverse shear force of 5 kn. the bolt material has a yield strength of syt syc 100 mpa. find the diameter of the bolt at factor of safety n-0.5, n 1 and n-2 using maximum shear stress theory

Answers: 3

continue

Engineering, 06.07.2019 04:10, ltorline123

Areheat rankine cycle operates with water as the working fluid. steam enters the first turbine at 8 mpa and 450°c and exits at 0.8 mpa. it is then reheated to 400°c before entering the second turbine, where it exits at 10 kpa. if the amount of work into the pump is 8.04 kj/kg and the net work per cycle produced is 1410.25 kj/kg, determine the thermal efficiency of the cycle.

Answers: 3

continue

You know the right answer?

) Xác định cách ghi quyền hạn người ký văn bản hành chính trong các trường hợp sau:
a) Quyết...