what is the expected draft and horse power of a 4 bottom,40cm plow travelling at a speed of 8 km/h in a sandy silt soil and depth of plough is 20cm. unit draft of soil is D = 3 + 0.056S^2?

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.