Engineering, 09.06.2021 20:10 amy290

I just want more answers this website sucks

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Engineering, 06.07.2019 05:30, pandasarecute53

There is a metal plate with thickness, thermal conductivity, density, and specific heat of 10 mm, 200 w/m.°c, 2500 kgrn3, and 900 j/kg. k, respectively. it has an initial uniform temperature of 22°c and is being heated in an oven for 2 minutes. air in the oven is maintained at 900 c with convection heat transfer coefficient of 190 w/m. k. determine the temperature of the plate when it is removed from the oven.

Answers: 3

continue

You know the right answer?

I just want more answers this website sucks...