Engineering, 08.06.2021 08:30 josiesolomonn1615
Oil is pumped from the lower reservoir to the upper reservoir at a rate of 0.40m ^ 3 / s . The is well smooth (r / d > 0.2) and the exit is sharped edge shown in the sketch . The pump efficiency is 80%
Answers: 2
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Oil is pumped from the lower reservoir to the upper reservoir at a rate of 0.40m ^ 3 / s . The is we...
English, 18.03.2021 02:50
Computers and Technology, 18.03.2021 02:50
English, 18.03.2021 02:50
English, 18.03.2021 02:50
English, 18.03.2021 02:50