subject
Engineering, 07.06.2021 16:20 ella3714

Time left 0:42:59 Two balanced three phase loads are connected in parallel, the loads are L,=30 kVA at 0.9 pf lag, and L2= 40 kW at 0.795 pf lag.
The loads are fed from a distribution line with an impedance of 0.1+j0.1 /0. The line to neutral voltage at the load end is 288 V
and zero phase shift, the phase current of the second load in A (if it is A-connected) is;
O A. 26.73-j20.39
O B. 33.35-14.30
O C. 100.04-112.89
O D. 80.19-361.18
O E 46.30-135.32
O F.57.76-17.44
O G. None
Two balanced three phase loads are connected in parallel, the loads are L1=30 KVA at 0.9 pf lag, and L2= 40 kW at 0.795 pf lag.
The loads are fed from a distribution line with an impedance of 0.1+j0.1 92/0. The line to neutral voltage at the load end is 288 V
and zero phase shift, the capacitance of A-connected capacitor bank that connected parallel to the loads to improve the power factor
to unity in uF is; (f=60 Hz)
A 154.92
OB. 51.64
OC 464.76
OD. 1394.28
O E. None​

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
image
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
image
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
Time left 0:42:59 Two balanced three phase loads are connected in parallel, the loads are L,=30 kVA...

Questions in other subjects:

Konu
Computers and Technology, 13.11.2021 03:10
Konu
History, 13.11.2021 03:20
Konu
Computers and Technology, 13.11.2021 03:20