Engineering, 02.06.2021 18:20 aliami0306oyaj0n
Which option identifies what Steven should use during the process in the following scenario and correctly explains why?
Steven is conducting a life cycle inventory of all of the energy and raw materials used in every stage of the production of an
eco-friendly home. It is important that this is done correctly since the impact analysis evaluates the effects of the product on
the environment, and also on human health, based upon the product's energy and raw material input and output.
O Estimated numbers should be used so that calculations can be as simple as possible.
O Exact numbers should be used, but calculations can be rounded to the nearest estimate
O Estimated numbers should be used so that calculations can be as variable as possible,
O Exact numbers should be used so that calculations can be as precise as possible
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
Which option identifies what Steven should use during the process in the following scenario and corr...
Questions in other subjects:
Mathematics, 29.01.2020 20:03
Chemistry, 29.01.2020 20:03
History, 29.01.2020 20:03
Social Studies, 29.01.2020 20:03
Computers and Technology, 29.01.2020 20:03
