Engineering, 31.05.2021 16:10 FlyingUnicorn123

A carrier signal with a frequency of 100 MHz, frequency by band limited information sign with 2 KHz modulating. Maximum frequency deviation of the FM sign (Δf) 25 KHz and information sign amplitude (Am) If it is 15.7 Volts;

a) Calculate the bandwidth of the FM sign?

b) The bandwidth of the FM signal is doubled and the frequency modulation constant is taken if kf = 10000

What can be said about the signal to noise ratio (SNR) of the signal, why?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Engineering, 04.07.2019 19:10, jrcspiderman2003

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

continue

Engineering, 06.07.2019 04:10, johnbobjones

Aheat pump that operates on the ideal vapor compression cycle with refrigerant-134a is used to heat water from 15°c to 45°c at a rate of 0.12 kg/s. the condenser and evaporator pressures are 1.4 and 0.32 mpa, respectively determine: (a) the power input to the heat pump

Answers: 1

continue

You know the right answer?

A carrier signal with a frequency of 100 MHz, frequency by band limited information sign with 2 KHz...