Engineering, 31.05.2021 14:00 noreenhussain

The given plan below shows a 2-way floor system carried by 1-story 2-bays frame system as shown in sec 1-1. The floor is 18 cm in thickness and made with reinforced concrete with fc`= 28MPa and fy= 420MPa, γc= 24kN/m3 . The floor is to carry a service live load of 5 kN/m2 . Assume that E is constant for all structural elements in the system. Determine the following: 1- Extract he structural system of beam ADG, beam BEH , frame ABC, and frame DEF, showing the loads to be carried on each element from the slab, and include the own weight of the element given that beams ADG and BEH have a section of 180mm in depth and 400 mm in width. Where the girder of all frames has a cross section of 300 mm in depth and 800mm in width. 2- Analyze beam ADG using slope- deflection equations method. 3- Analyze beam BEH using moment distribution method. 4- Analyze frame ABC using moment distribution method

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, selenamr

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed. gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Engineering, 06.07.2019 03:10, cchotshot

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg. a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg. m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?

Answers: 1

continue

You know the right answer?

The given plan below shows a 2-way floor system carried by 1-story 2-bays frame system as shown in s...