Engineering, 28.05.2021 15:10 raiindrxp

A salt solution is prepared in a graduated cylinder using 400 g NaCl and 1000 g water at 20 °C. Solubility of NaCl at 20 °C is 357 g NaCI/1000 water then some NaCl precipitates at the bottom of the cylinder. The density of the saturated solution is 1.2 g/ml. The diameter of the graduated cylinder is 5cm. What should be height of the cylinder. Determine concentration profile of NaCl in the cylinder from the bottom to the surface of the solution versus time.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

You know the right answer?

A salt solution is prepared in a graduated cylinder using 400 g NaCl and 1000 g water at 20 °C. Solu...