Calculate me 5 000 N
B
0:3
Read each of these scenarios and work out their mechanical advantage:
Piston A is exerting a force of 50 N on the system. A load of
5000 N needs to be crushed. What mechanical advantage will be
generated to achieve this?
2 if a mechanical advantage of 100 N is needed to crush a load of 7
000 N, what amount of force is required?​

Fluids at rest possess no flow energy. a)- true b)- false

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.