Engineering, 23.05.2021 14:30 moncera
One soft iron solenoid with a cross sectional area of 600 mm²has an average length of 300 mm
and is wound with 300 turns of wire with 2A current running through it. Given the relative
permeability,µr is 900. CalculateThe magnetomotive force
ii. The magnetic field strength
iii. The flux density within the magnetic circuit
iv. The amount of flux within the magnetic circuit
v. The circuit reluctance
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
You know the right answer?
One soft iron solenoid with a cross sectional area of 600 mm²has an average length of 300 mm
and is...
Questions in other subjects:
History, 28.08.2019 00:00
Mathematics, 28.08.2019 00:00
