Engineering, 21.05.2021 22:20 nauticatyson9

How is the caliber of a rifle or handgun determined? A, The length of the barrel measured from the muzzle to the action
A, The length of the barrel measured from the muzzle to the action
The length of the barrel measured from the muzzle to the action
B, The distance between opposite lands inside the barrel
B, The distance between opposite lands inside the barrel
The distance between opposite lands inside the barrel
C, The circumference of the barrel when measured from the exterior.
C, The circumference of the barrel when measured from the exterior.
The circumference of the barrel when measured from the exterior.
D, The length of the ammunition that it can fire
D, The length of the ammunition that it can fire
The length of the ammunition that it can fire

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

You know the right answer?

How is the caliber of a rifle or handgun determined? A, The length of the barrel measured from the...