subject
Engineering, 21.05.2021 05:30 lesly0913

1) Una espira circular hecha de material conductor elástico estirado tiene un radio de 1.23 m. Se pone en un plano formando ángulos rectos con un campo magnético uniforme de 785 mT. Cuando se suelta, su radio empieza a disminuir a una velocidad instantánea de 7.50 cm/s. Calcule la fuerza electromotriz inducida en la espira en ese momento. 2) En 1929, por primera vez, M. R. Van Cauwenberghe logró medir por vez primera directamente la corriente de desplazamiento id entre las placas de un capacitor de placas paralelas al que se aplicaba una diferencia de potencial alterna, según se indica en la figura. Utilizó placas circulares cuyo radio efectivo medía 40.0 cm y cuya capacitancia era de 100 pF. La diferencia de potencial tenía un valor máximo de ΔVm de 174 kV a una frecuencia de 50.0 Hz. a) ¿Cuál era la corriente máxima de desplazamiento entre las placas? b) ¿Por qué era tan grande la diferencia de potencial aplicada que se escogió?

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
image
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
image
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
image
Engineering, 06.07.2019 03:10, kturvey225
Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window
Answers: 3
You know the right answer?
1) Una espira circular hecha de material conductor elástico estirado tiene un radio de 1.23 m. Se po...

Questions in other subjects:

Konu
Biology, 11.05.2021 21:10