Engineering, 20.05.2021 17:30 biancaalegriashaffer

A 10 cm-i. d. pipe is used to transport water from storage to its point of use in a manufacturing process. A flow nozzle is selected to meter the flow, and assume that we know that the diameter ratio beta is between 0-3 and 0.6. If the pressure drop of 180 cm H_2 O is desired at the flow rate of 3 times pi times 10^-3 m^3/s, select the nozzle diameter, d_0, by answering the following questions: 1. The corresponding Renold's number, Re_ '
2. The corresponding flow rate K_0;
3. The selected nozzle diameter d_0-
For ease of calculation, assume that the specific weight of water is gamma = 10 times 10^3 N/m^3, the water density is at rho = 1000 kg/m^3, and the viscosity is at mu = 1 times 10^-3 N-s/m^3, the water density is at rho = 1000 kg/m^3, and the viscosity is at mu = 1 times 10^-3 N-s/m^2 .

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Engineering, 05.07.2019 23:20, neisha2507

Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket

Answers: 3

continue

You know the right answer?

A 10 cm-i. d. pipe is used to transport water from storage to its point of use in a manufacturing pr...