When annotating a full height wall section or detail, you want
to call out the height of
as a...
Engineering, 19.05.2021 01:00 rgilliam3002
When annotating a full height wall section or detail, you want
to call out the height of
as a start point for
referencing other heights and locate the extension lines of all
dimensions strings to
not to
Select Answer
Top of slab, face of finish, face of framing
The window sill, face of framing, face of finish
The top of plate, face of finish, face of framing
O Top of slab, face of framing, face of finish
Answers: 2
Engineering, 04.07.2019 18:10, heidiburgos1own6c0
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Mathematics, 20.11.2021 14:00
Computers and Technology, 20.11.2021 14:00
Mathematics, 20.11.2021 14:00
Business, 20.11.2021 14:00
Mathematics, 20.11.2021 14:00