Engineering, 18.05.2021 18:40 miagirl0311
A square plate of titanium is 12cm along the top, 12cm on the right side, and 5mm thick. A normal tensile force of 15kN is applied to the top side of the plate. A normal tensile force of 20kN is applied to the right side of the plate. The elastic modulus, E, is 115 GPa for titanium. If the left and bottom edges of the plate are xed, calculate the normal strain and elongation of both the TOP and RIGHT side of the plate. Report your answer with proper units and signicant digits.
Answers: 2
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
A square plate of titanium is 12cm along the top, 12cm on the right side, and 5mm thick. A normal te...
History, 13.10.2020 02:01
Arts, 13.10.2020 02:01
English, 13.10.2020 02:01
Physics, 13.10.2020 02:01
English, 13.10.2020 02:01
Engineering, 13.10.2020 02:01