Engineering, 18.05.2021 02:50 reyesmtz5414

Taking: W = (N) kN/m P = (3N) kN M = (8N) kN. m Where N is the last two digits of student number: 1) Determine the reaction forces at points A, C, E, F, and G; 2) Determine the shear forces at points A, B, C, D, E, F and G; 3) Determine the bending moment at points A, B, C, D, E, F and G; 4) Draw the SFD 5) Draw the BMD

Taking: W = (N) kN/m P = (3N) kN M = (8N) kN.m Where N is the last two digits of student number: 1)

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:20, samueltaye

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

continue

You know the right answer?

Taking: W = (N) kN/m P = (3N) kN M = (8N) kN. m Where N is the last two digits of student number: 1)...