Engineering, 15.05.2021 01:00 royal6032

A 2x6 (1.5 inch by 5.5 inch) edgewise beam is used to carry the load specified above. The beam has 3 inches of bearing length at each end support. The bending strength is 2500 psi, shear strength is 170 psi, the modulus of elasticity is 1.5x106 psi, deflection limit is L/240 and the compression perpendicular to grain is 600 psi. Find the following values to design the beam; a. The maximum shear force
b. The maximum moment
c. The value of the deflection limit
d. The bending stress in the beam
e. The shear stress in the beam
f. The maximum deflection in the beam
g. The maximum bearing stress at the support
h. Does the beam fail?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

You know the right answer?

A 2x6 (1.5 inch by 5.5 inch) edgewise beam is used to carry the load specified above. The beam has 3...