Engineering, 14.05.2021 14:00 jacky852

2. Ang sangay na nagbibigay-kahulugan sa mga batas ng bansane A. Tagapagbatas
B. Tagapaghukom
D. Tagapagtaguyod

3. Tinitiyak ng pambansang pamahalaan na ang karapatan ng mama
ay mapapangalagaan sa pamamagitan ng pagkakaloob ng mga serbisyo
A parisarili
C. pangkalusugan
B. pangkultura
D. pangkabuhayan

4. Ang sangay ng pamahalaan ng Pilipinas ay
A dalawa
B tatlo
D lima
Capat

5. Ang nagpapatupad ng batas ay ang sangay na
A. Tagapagbatas
C. Tagapagpaganap
B Tagapaghukom
D. Tagapagtaguyod

6. Ang sangay na gumagawa ng batas ay ang sangay na
A Tagapagbatas
C. Tagapagpaganap
B. Tagapaghukom
D. Tagapagtaguyod

7. Ang sangay na nagbibigay ng interpretasyon ng batas ay ang sang
A. Tagapagbatas
B. Tagapaghukom
C. Tagapagpaganap
D. Tagapagtaguyod

8. Mahalaga ang pamahalaan dahil ito ang namumuno sa pagpapatupad ng mga programa para sa
A kaibigan
C. nasasakupan
B. kamag-anak
D turista

9.Ang mga gumagawa ng batas ay ang
A hukom
C. pangulo
B. kongreso
D. sekretarya

10. Ang nagpapatupad ng batas ay ang
A hukom
C. pangulo
B. kongreso
D. sekretarya

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

You know the right answer?

2. Ang sangay na nagbibigay-kahulugan sa mga batas ng bansane A. Tagapagbatas
B. Tagapaghukom<...