Engineering, 14.05.2021 04:30 OnlineSchool
Steam enters a turbine with a pressure of 30 bar, a temperature of 400 oC, and a velocity of 160 m/s. Saturated vapor at 100 oC exits with a velocity of 100 m/s. At steady state, the turbine develops work equal to 540 kJ per kg of steam flowing through the turbine. Heat transfer between the turbine and its surroundings occurs at an average outer surface temperature of 350 K. Determine the rate at which entropy is produced within the turbine per kg of steam flo
Answers: 1
(1)![-\dot Q_{out} + \dot m \cdot \left[h_{in}-h_{out}+ \frac{1}{2}\cdot (v_{in}^{2}-v_{out}^{2}) - w_{out} \right] = 0](/tpl/images/1323/3217/1762a.png)
(2)
(3)
, we have the following system of equations:
(2b)
(3b)
- Heat transfer rate between the turbine and its surroundings, in kilowatts.
- Specific heat transfer between the turbine and its surroundings, in kilojoules per kilogram.
- Outer surface temperature of the turbine, in Kelvin.
, 
- Specific enthalpy of water at inlet and outlet, in kilojoules per kilogram.
, 
- Speed of water at inlet and outlet, in meters per second. 
- Specific work of the turbine, in kilojoules per kilogram.
, 
- Specific entropy of water at inlet and outlet, in kilojoules per kilogram-Kelvin.
- Specific generated entropy, in kilojoules per kilogram-Kelvin.
, 
, 
, 
, 
, 
, 
, 
, 
, 
, 
, 
, 
and 
, then the rate at which entropy is produced withing the turbine is:
![q_{out} = 3231.7\,\frac{kJ}{kg} - 2675.6\,\frac{kJ}{kg} + \frac{1}{2}\cdot \left[\left(160\,\frac{m}{s} \right)^{2}-\left(100\,\frac{m}{s} \right)^{2}\right] - 540\,\frac{kJ}{kg}](/tpl/images/1323/3217/10083.png)
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 19:20, mads000
Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.
Answers: 1
Engineering, 04.07.2019 19:20, rosemary909
In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.
Answers: 3
You know the right answer?
Steam enters a turbine with a pressure of 30 bar, a temperature of 400 oC, and a velocity of 160 m/s...
Questions in other subjects:
Geography, 22.11.2020 23:40
Mathematics, 22.11.2020 23:40
Mathematics, 22.11.2020 23:40
Health, 22.11.2020 23:40
Mathematics, 22.11.2020 23:40
Mathematics, 22.11.2020 23:40
Mathematics, 22.11.2020 23:40
Mathematics, 22.11.2020 23:40
