Engineering, 14.05.2021 03:20 mariaramirez013

A helical compression spring is fabricated from ASTM A229 oil-quench-tempered cold-drawn steel wire having a diameter d = 0.9 mm, a modulus of rigidity G = 80 GPa, and a modulus of elasticity E = 200 GPa. The spring has 14.5 active coils with a mean diameter D = 10 mm. The ends are squared-and-ground. The spring is supported between flat parallel surfaces (fixed ends). Required:
a. Determine the spring rate.
b. Determine the minimum hole diameter for the spring to operate in.
c. Determine the total number of coils needed.
d. Determine the solid length.
e. Determine a static factor of safety based on the yielding of the spring if it is compressed to its solid length.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:10, Larkinlover703

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

You know the right answer?

A helical compression spring is fabricated from ASTM A229 oil-quench-tempered cold-drawn steel wire...