Engineering, 13.05.2021 20:10 ronaldhernandez598
Parts X and Y are metal parts and produced separately, each requiring two press-working operations. Part X is routed through operations 1 and 2, and part Y is routed through operations 3 and 4. The two parts are then joined in a welding step (operation 5), and the assembly is routed to an electroplating operation (operation 6). The six operations have the following fraction defect rates: q1 = 5%, q2 = 15%, q3 = 10%, q4 = 20%, q5 = 13%, q6 = 8%. If the desired final quantity of assemblies is 100,000 units, how many starting units of parts X and Y will be required? There is no inspection or separation of defective units until after the final process, so defective units and good units are processed together through all production processes
Answers: 3
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 19:10, Mimidj9279
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
Parts X and Y are metal parts and produced separately, each requiring two press-working operations....
Mathematics, 01.02.2021 17:00
Mathematics, 01.02.2021 17:00
Social Studies, 01.02.2021 17:00
Arts, 01.02.2021 17:00