Engineering, 13.05.2021 14:00 cathydaves
Peter Reyes, a marketing surveyor, found out that it takes a total of 151 minutes for 10 persons to complete a particular questionnaire he made. He applied a performance rating of 115% and there is an allowance of 23% added to the normal time. What is the standard time for this particular job?
Answers: 3
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:10, mamasbug4285
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Peter Reyes, a marketing surveyor, found out that it takes a total of 151 minutes for 10 persons to...
Mathematics, 11.03.2021 07:20
Chemistry, 11.03.2021 07:20
Mathematics, 11.03.2021 07:20
English, 11.03.2021 07:20
History, 11.03.2021 07:20
Mathematics, 11.03.2021 07:20
Mathematics, 11.03.2021 07:20