Engineering, 11.05.2021 16:40 Svetakotok

Dr. Lee’s student is measuring the beam deflection according to the weight of coins. Number of Experiment Coin Weight [Kg] Beam Deflection [mm]
1 0.00 1.00
2 0.20 1.22
3 0.40 1.49
4 0.60 1.82
5 0.80 2.23
6 1.00 2.72
7 1.20 3.32
We found the deflection is somehow proportional to the coin weight. If the linear fit curve is determined as Y [mm]=a [mm/Kg] × X [Kg]+b [mm], calculate the total uncertainty (ut) of the beam deflection when ua (uncertainty of a) = 0.10 mm/Kg and ub (uncertainty of b) = 0.05 mm. Please use the equation below:
ut = √((f/a)X=Xmax × ua)2 + (f/b × ub)2

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

You know the right answer?

Dr. Lee’s student is measuring the beam deflection according to the weight of coins. Number of Expe...