subject
Engineering, 11.05.2021 01:00 Knownothing

Wells drilled by a nonprofit called Water for South Sudan use a pump that can provide up to 5,500 gallons of water per day. Use this total amount to calculate the following: How many gallons per day per person could the well produce for a village with a population of 850 if every gallon went to domestic use?

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
image
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
image
Engineering, 04.07.2019 19:20, sashajayne8260
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
image
Engineering, 06.07.2019 03:10, serenad2
Different between boring and turning?
Answers: 1
You know the right answer?
Wells drilled by a nonprofit called Water for South Sudan use a pump that can provide up to 5,500 ga...

Questions in other subjects:

Konu
Social Studies, 22.09.2019 04:10
Konu
French, 22.09.2019 04:10