Engineering, 10.05.2021 16:10 stump76

The stamping division at Bass Auto Works performs all necessary metal stamping operations for body panels. This is a 16 hour/day, 240 days/year operation. Currently, there are 30 stamping lines. Data on the breakdown and repair times of the lines has been analyzed by a group of Senior Design Students at State College. They determined that it was reasonable to assume that both are exponentially distributed. The mean time to failure for a single stamping line was found to be about 6.5 hours. The division currently employs 4 repairmen who work in teams of 2. When a stamping line breaks down, a single team is sent to repair it. The average repair time for a stamping line is about 4 hours. Required:
a. Develop a model for this system. Define states and events.
b. How many repair crew is needed to meet the assembly demand?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:20, krojas015

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 19:10, shunna33

Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?

Answers: 2

continue

You know the right answer?

The stamping division at Bass Auto Works performs all necessary metal stamping operations for body p...