Write a program that models 2 vehicles (Car and Truck) and will be able to simulate driving and refueling them in the summer. Car and truck both have fuel quantity, fuel consumption in liters per km and can be driven given
distance and refueled with given liters. But in the summer both vehicles use air conditioner and their fuel
consumption per km is increased by 0.9 liters for the car and with 1.6 liters for the truck. Also the truck has a tiny
hole in his tank and when it gets refueled it gets only 95% of given fuel. The car has no problems when refueling and
adds all given fuel to its tank. If vehicle cannot travel given distance its fuel does not change

An array of m-50 thermoelectric modules is installed on the exhaust of a sports car. each module has an effective seebeck coefficient of sp of 0.143 5vk and an internal electrical resistance of r.-4 ? in addition, : (15 points each module is of width w 60mm and contains n=100 pairs of semiconducting pellets. each pellet hasan overall length of 2l-5mm and a cross-sectional area as 1.2 x 10'm and is characterized by a thermal conductivity of kpl2w rnk. the hot side of each module is exposed to exhaust gases at·p650c with hia4ow rrk while the osite side of each module is cooled by pressurized water at surface) and 156 °c (at the cool surface). 11s c with h: -500w/m'k. the modules are wired n series and the load resistance is r d=400ohm .the module surface temperatures, t, and ts are 183 "c (at the hot surface and 156c (at the cool surface) a)-draw a schematic of this scenario and label all parts. a. b. if the induced current, i, is 0.15 amps, what is the total power (pa) for one module? c. what is the total power harvest from the exhaust with all 50 modules?