Engineering, 05.05.2021 20:00 mpete1234567890

A venture tube is used to measure the flow rate of a liquid in a pipe (liquid density is 800 kg/m3). The pipe has a diameter of 10 cm and the smallest diameter of the venture has a diameter of 4 cm. A manometer with a manometer fluid of mercury (specific weight of 133 kN/m3) is used to calculate the flow rate which is connected to the venture section such that one leg is far upstream and the second leg is at the minimum diameter of the venture tube. If the flow rate is 0.05 m3/s determine the elevation change in the manometer fluid. a. 14.6 m
b. 9.28 m
c. 4.64 m
d. 2.32 m

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, breannaasmith1122

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

continue

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

You know the right answer?

A venture tube is used to measure the flow rate of a liquid in a pipe (liquid density is 800 kg/m3)....