subject
Engineering, 03.05.2021 15:20 sophiawatson70

A fast moving hurricane produces a constant rainfall intensity of 110 mm/h for 45 min. The area consists almost entirely of sandy loam, which typically has a saturated hydraulic conductivity of 8.6 mm/h, average suction head of 110 mm, porosity of 0.45, field capacity of 0.190, wilting point of 0.085, and depression storage of 4 mm. Calculate the cumulative infiltration after 30 min, assuming ponding is continuous from the beginning of the storm. Assume the initial water content is midway between the field capacity and wilting point..

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
image
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
image
Engineering, 04.07.2019 18:20, dlr1628
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
A fast moving hurricane produces a constant rainfall intensity of 110 mm/h for 45 min. The area cons...

Questions in other subjects:

Konu
Mathematics, 01.12.2019 12:31
Konu
History, 01.12.2019 12:31
Konu
Mathematics, 01.12.2019 12:31