subject
Engineering, 30.04.2021 01:40 jacquetpaul1969

Decision tree: 1. Suppose Mr. Abdullah has $50,000 to invest in the financial market for one year. His choices have
been narrowed to two options. Assume that any long-term capital gains will be taxed at 20%. Mr.
Abdullah’s minimum attractive rate of return (MARR) is known to be 5% after taxes. Determine the
payoff amount at the tip of each branch.
– Option 1. Buy 1,000 shares of a technology stock at $50 per share that will be held for one
year. Since this is a new initial public offering (IPO), there is not much research information
available on the stock; hence, there will be a brokerage fee of $100 for this size of
the transaction (for either buying or selling stocks). Assume that the stock is expected to provide
a return at any one of three different levels: a high level (A) with a 50% return ($25,000), a
medium level (B) with a 9% return ($4,500), or a low level (C) with a 30% loss Assume also
that the probabilities of these occurrences are assessed at 0.25, 0.40, and 0.35, respectively.
No stock dividend is anticipated for such a growth-oriented company.
– Option 2. Purchase a $50,000 U. S. Treasury bond, which pays interest at an effective annual
rate of 7.5% ($3,750). The interest earned from the Treasury bond is nontaxable income.
However, there is a $150 transaction fee for either buying or selling the bond. Mr.
Abdullah’s dilemma is which alternative to choose to maximize his financial gain.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
image
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
image
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
image
Engineering, 04.07.2019 18:20, 1230bering
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
You know the right answer?
Decision tree: 1. Suppose Mr. Abdullah has $50,000 to invest in the financial market for one year....

Questions in other subjects:

Konu
Mathematics, 08.12.2020 21:40