subject
Engineering, 27.04.2021 15:50 jheriann

Route Choice The cost of roadway improvements to the developer is a function of the amount of traffic being generated by the theater as well as the routes that these vehicles use in getting to/from the theater. Thus, you need to determine traffic demand on the available routes between the housing area (apartment complexes) and the proposed theater site. There are two potential routes from this housing area to the proposed theater site. The total flow on these two routes (origin-to-destination demand plus other traffic) is 5500 vehicles. These routes have the following speed and length characteristics: Route Free Flow Speed(mi/h) Length(mi)
1 45 5.5
2 40 3.5
3 35 3.75

It is known that the individual route travel times increase (in units of minutes) according to the following functions (with x in units of 1000 vehicles per hour):

Route Travel time increase as a function of traffic volume
1 0.5x1
2 x2
3 0.25

Required:
Determine user equilibrium flows and travel times if the total flow on these routes (origin-to-destination demand plus other traffic) is 5500 veh/h.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 18:20, 1230bering
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
image
Engineering, 04.07.2019 18:20, 21megoplin
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
Route Choice The cost of roadway improvements to the developer is a function of the amount of traffi...

Questions in other subjects:

Konu
Mathematics, 21.05.2021 07:00
Konu
History, 21.05.2021 07:00