Engineering, 27.04.2021 15:10 tiffanybrandy23

A water treatment plant operates two circular sedimentation basins in parallel to remove suspended solids and treats a total flow of 12 mgd. Each basin is center-fed (i. e., water comes into the reactor in the middle and radiates toward the outside of the basin) and the solid-free water exits the reactor over weirs that are located 2 feet within the basin perimeter. Each tank has a diameter of 65 feet with a water depth of 12 feet. a.What is the detention time in each clarifier (in minutes)? b. What is the overflow rate for each clarifier (in ft3/ft2-d and gpd/ft2)? c. What is the weir loading rate for each clarifier (in ft3/ft -d and gpd/ft)?d. Calculate the values for parts a-c if only one clarifier is in service.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, breannaasmith1122

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

You know the right answer?

A water treatment plant operates two circular sedimentation basins in parallel to remove suspended s...