subject
Engineering, 27.04.2021 03:50 yasarhan2

Geometry Select the correct answer from each drop-down menu.

1). If (blank), then triangle ABC and triangle DEF are congruent by the ASA criterion.

2). If (blank), then triangle ABC and triangle DEF are congruent by the SAS criterion.

3). Triangle ABC and triangle DEF are congruent if (blank).

Options for 1.
A) AB=DE
B) CA=FD
C)Angle B is congruent to angle E
D) Angle A is congruent to angle D

Options for 2.
A) AB=DE
B) Angle B is congruent to angle E
C) CA=FD
D) Angle A is congruent to angle D

Options for 3.
A) angle A is congruent to angle D
B) AB=DE
C)AB=DF


Geometry

Select the correct answer from each drop-down menu.
1). If (blank), then triangle ABC an

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
Geometry Select the correct answer from each drop-down menu.

1). If (blank), then tria...

Questions in other subjects:

Konu
Engineering, 24.04.2020 22:56
Konu
Mathematics, 24.04.2020 22:56