Engineering, 24.04.2021 01:00 Leonorareed5145

Consider a circular cross-section which experiences an internal torsional load T=17 Nm, an internal bending moment M_y=24 Nm, and an internal shear force V= 10 kN. All loads act in the directions shown in the figure below. The cross-section has a diameter, d=69 mm. Given these internal loads in the cross-section, calculate the stresses at point B.
Determine the normal stress, alphaB, and shear stress tauB, at point B in MPa.

ans: SigmaB = 0.7441, TauB = -28.7895
I need help getting to the answer. Thank you.

Consider a circular cross-section which experiences an internal torsional load T=17 Nm, an internal

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:20, dlr1628

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

continue

Engineering, 04.07.2019 18:20, AnonymousLizard52303

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

continue

You know the right answer?

Consider a circular cross-section which experiences an internal torsional load T=17 Nm, an internal...